Selecter India

The Great Selec LED Indicator Red 22.5mm 220V is a panel-mounted indicator light used to show the status of an electrical circuit or device. Here’s a comprehensive overview of its features, installation, and usage:

Features:

• Brand: Great Selec.
• Type: LED Indicator.
• Color: Red, often used for indicating power, alarms, or faults.
• Size: 22.5mm diameter, which is the standard size for panel-mount indicators.
• Voltage: Designed to operate with a 220V AC power supply.

Installation:

1. Prepare the Panel:

   • Ensure your panel or mounting surface has a 22.5mm hole drilled to fit the indicator. This is a standard size for panel-mount indicators.

2. Wiring:

   • Power Connections:
     • Live (Hot) Wire: Connect one terminal of the LED indicator to the live (hot) wire of the 220V AC power supply.
     • Neutral Wire: Connect the other terminal to the neutral wire of the 220V AC power supply.
   • Safety Precaution: Always ensure that power is turned off before making any connections to avoid electric shock. Use appropriate insulation and secure connections.

3. Mounting:

   • Insert the LED indicator into the 22.5mm hole in your panel.
   • Secure it in place using the provided mounting hardware, such as a nut or clip, to ensure it stays firmly in position.

Operation:

• Function: When the indicator is connected to a 220V AC supply, the LED will illuminate red, providing a visual signal of power or a specific status depending on the application.
• Indicator Use: Red LEDs are commonly used to indicate power, fault conditions, or alert states.

Maintenance and Safety:

• Voltage Compliance: Verify that the indicator is connected to a 220V AC supply to prevent damage. Connecting to a different voltage could harm the indicator and pose safety risks.
• Inspect Wiring: Regularly check connections to ensure they are secure and properly insulated.
• Replacement: If the LED fails, you will need to replace the entire indicator unit, as the LED is not typically replaceable separately.

Application:

• Electrical Panels: Used in electrical panels to indicate power or status conditions.
• Control Panels: Commonly found in industrial and control panels to provide visual feedback on system status.
• Machinery: Used on machinery to indicate operational states or alerts.

For more specific details about the LED indicator’s technical specifications, installation instructions, or safety information, refer to the product’s datasheet or manual provided by Great Selec. If you have additional questions or need further assistance, feel free to ask!

The Great Selec LED Indicator Yellow 22.5mm 220Voltage is a panel-mounted LED indicator designed for use with a 220V AC power supply. Here’s a comprehensive guide to understanding and installing this indicator:

Features:

• Brand: Great Selec.
• Type: LED Indicator.
• Color: Yellow, which is often used for warning or status indication.
• Size: 22.5mm diameter, the standard size for panel mounting.
• Voltage: Rated for 220V AC power supply.

Installation Instructions:

1. Prepare the Panel:

   • Ensure your panel or mounting surface has a 22.5mm hole drilled to accommodate the indicator.

2. Wiring:

   • Power Connections: Connect the indicator to the 220V AC power supply.
     • Live (Hot): Connect one terminal of the indicator to the live (hot) wire of the 220V AC supply.
     • Neutral: Connect the other terminal to the neutral wire of the 220V AC supply.
   • Safety Precaution: Ensure that the power is turned off before making connections. Proper insulation and safety practices are crucial to prevent electrical shocks or shorts.

3. Mounting:

   • Insert the LED indicator into the 22.5mm hole in your panel.
   • Secure the indicator using the provided mounting hardware, such as nuts or clips, to ensure it remains firmly in place.

Operation:

• When the LED indicator is connected to a 220V AC supply, it will light up yellow. This provides a visual signal that the circuit or equipment is receiving power or is in a particular operational state.

Maintenance and Safety:

• Voltage Compliance: Verify that the indicator is connected to a 220V AC supply only. Connecting it to a different voltage could damage the indicator or pose safety risks.
• Check Connections: Make sure all wiring connections are secure and properly insulated to prevent short circuits or potential hazards.
• Replacement: If the LED fails, the entire indicator unit will need to be replaced, as the LED is not typically replaceable separately.

Application:

• Yellow LED indicators are often used to indicate caution, warning, or operational statuses that require attention. They are commonly found in control panels, machinery, and electrical systems.

Enertech LED Indicator Buzzer 220V

• Type: LED Indicator with Integrated Buzzer
• Voltage: 220V AC
• Features:
  • Dual Function: Combines a bright LED indicator light with an audible buzzer for clear alerts
  • LED Color Options: Available in various colors (e.g., red, green, yellow) for different status indications
  • Audible Alert: Buzzer emits sound for notifications or alarms
  • Durable and Robust: Built to endure industrial and commercial environments
  • Energy Efficient: Designed to operate effectively on 220V AC power while consuming minimal energy
• Applications: Ideal for control panels, machinery, and equipment where both visual and audible alerts are needed

1 Tier LED Tower Light with Buzzer

Make Enertech

Color: Red,

Supply Volts: 230VAC

With Buzzer

Tower lampTypes :-

Tower lamp base mounting

Tower lamp nano type.

Tower lamp busbar indicator.

Tower lamp three tier steady.

Tower lamp three tier red flasher buzzer green steady , amber steady.

Tower lamp three tier all flasher.

Tower lamp five tier all steady & flasher.

Tower lamp single tier steady & flasher.

Tower lamp buzzer flasher.

Tower lamp two tier steady.

Tower lamp two tier red buzzer flasher & green steady.

Greatselec LED Indicator Buzzer 24V

• Type: LED Indicator with Integrated Buzzer
• Voltage: 24V DC
• Features:
  • Dual Function: Combines a bright LED indicator light with an audible buzzer
  • LED Color: Typically available in various colors (e.g., red, green, yellow) for different status indications
  • Audible Alert: Buzzer provides sound notifications for alerts or alarms
  • Durable Construction: Designed to withstand industrial and commercial conditions
  • Energy Efficient: Low power consumption with LED and buzzer components
• Applications: Used in control panels, machinery, and equipment for visual and audible status notifications or alarms